How to choose a precision screwdriver set

Start with the screw, not the device name

Find the instructions for your exact job and note the profile and size required for each screw you intend to remove. Then compare both details with the set’s bit list. A device name in a product title is a useful starting point, but it doesn’t tell you which screws are involved in your particular repair.

Wera’s drive-profile guide lists Phillips and Pozidriv as separate profiles, and likewise distinguishes Torx from Torx BO. A description such as cross-head or star doesn’t identify the exact profile. If the instructions don’t give you enough detail to identify the screw, establish that before selecting a set by its piece count.

Read the JOREST bit list

JOREST specifies 30 bits in its 40-piece set, including Phillips, flathead, Torx, Torx security, triwing, pentalobe and MID profiles. Each profile has its own listed sizes, so check the individual entries rather than assuming every size is included.

For example, the detailed list names ordinary Torx T1 through T5, alongside security TR6, TR7, TR8, TR9, TR10, TR15 and TR20. It also names pentalobe P2, P5 and P6. If your instructions specify one of those profiles, compare the exact size as well; a different size in the same family doesn’t answer the requirement.

Resolve the Torx description before ordering

The JOREST listing names Torx T6 and T8 in its title, while the detailed bit list names security TR6 and TR8. Its device-use descriptions also refer to T6 and T8. Those descriptions do not resolve which exact bits are included.

If you need ordinary T6 or T8, ask the seller to confirm the contents before ordering. Keep the required profile and size to hand when you ask. Until the conflict is resolved, the set cannot be recommended for that specific requirement; the title alone is not enough to settle it.

Decide whether you need the other tools

The JOREST set includes a handle as well as the listed bits, spudgers, tweezers, a brush and a suction cup with a SIM card tool. Its piece count is therefore not a count of screwdriver bits. The additional pieces are relevant only if your job calls for them.

JOREST describes the spudgers and suction cup as opening tools and the tweezers as a way to grip small parts. Check your device’s instructions for the opening steps and tools they specify. An included opening tool doesn’t replace a missing bit, and a suitable bit list doesn’t by itself establish the other steps needed for your repair.

Know when to look elsewhere

JOREST says its small bits are for precision work, not large screws. If your job includes large screws, look for a separate set that lists the required profiles and sizes for them. The material name S2 steel is part of the product description, but it doesn’t establish which screw sizes the bits fit.

If the JOREST contents don’t match your requirements, or a necessary bit remains unconfirmed, browse Screwdriver Sets with your list of required profiles and sizes. Compare the detailed contents of each option rather than treating a higher piece count as proof that it covers the job.

Questions and answers